|
TOWN OF LADY LAKE
CHAPTER 14
WATER AND SEWER STANDARD SPECIFICATIONS
TABLE OF CONTENTS
SECTION PAGE
1 INTRODUCTION 14 - 1
2 DEFINITIONS 14 - 1
3 BASIC INFORMATION
a) Authority 14 - 4
1) Approval 2) Scope and Intent 3) Variances 4) Penalties and Enforcement 5) Changes to These Standards
b) General 14 - 5
1) 100-year Flood 2) Utility Coordination 3) Notification 4) Power and Authority of Inspectors 5) Record Drawings 6) Erosion Control 7) Warranties 8) Transfer of Private Ownership 9) Property Ownership 10) Trade Names 11) Drawing Water from Fire Hydrants 12) Damaging Equipment
c) Discharge into Town Systems 14 - 6
d) Water Shortage Conditions 14 - 7
1) Application of Regulations 2) Certain Uses Prohibited 3) Exceptions CHAPTER 14 WATER AND SEWER STANDARD SPECIFICATIONS TABLE OF CONTENTS (continued)
4 UTILITY EXCAVATION, TRENCHING AND BACKFILLING
a) General 14 - 8
b) Materials 14 - 8
1) Wood Sheeting 2) Steel Sheeting 3) Concrete
c) Workmanship 14 - 9
1) Trench Dimensions and Trench Grade 2) Utility Bedding 3) Unsuitable Material Below Trench Grade 4) Extra Utility‑Bedding Material 5) Sheeting and Bracing 6) Excavated Material 7) Material Disposal 8) Borrow 9) Dewatering 10) Obstructions 11) Backfill 12) Roadway and Pavement Restoration 13) Protection and Restoration of Property 14) Cleanup
d) Utility Site Preparation and Restoration 14 - 12
1) General 2) Clearing and Grubbing 3) Dust Control 4) Restoration
5 CASING PIPE-BORING AND JACKING
a) General 14 - 13
b) Casing Pipe Materials and Installation 14 - 14
1) Dimensions and Material
CHAPTER 14 WATER AND SEWER STANDARD SPECIFICATIONS TABLE OF CONTENTS (continued)
2) Areas Not Under Jurisdiction 3) Workmanship
6 PIPE, FITTINGS, VALVES, FIRE HYDRANTS AND APPURTENANCES
a) General 14 - 15
b) Pipe and Fittings 14 - 16
1) General 2) Identification and Warning 3) Cast and Ductile Iron 4) Polyvinyl Chloride (PVC) 5) Copper Pipe and Tubing 6) Tapping Saddles 7) Service Saddles 8) Water Service Line
c) Valves, Fire Hydrants and Appurtenances 14 - 19
1) Valves 2) Backflow Devices 3) Check Valves 4) Plug Valves (PV) 5) Valve Boxes 6) Meter Boxes 7) Fire Hydrants
d) Installation Standards 14 - 22
7 SANITARY GRAVITY SEWERS
a) Design Standards 14 - 23
1) System Design 2) Manholes 3) Terminal Lampholes 4) Service Laterals 5) Grease Traps
CHAPTER 14 WATER AND SEWER STANDARD SPECIFICATIONS TABLE OF CONTENTS (continued)
b) Construction Standards 14 - 28
1) General 2) Pipe Depth and Protection   |